Metal Pneumatic Fittings
One-stop solution for Pneumatic Cylinder Manufacturers solenoid valve and pneumatic fittings since 2013.
Language
One-stop solution for Pneumatic Cylinder Manufacturers solenoid valve and pneumatic fittings since 2013.
Our metal pneumatic push in fittings have double seal kits inside, this can be sure our fittings with no leakage; and its working life is much longer than common standard.
A lot of customers are using Camozzi fittings before, now they are using ours well.
Fluid Type:Air(No other gases or liquids)
Working Pressure:0.8-16bar
Max Pressure:20bar
Working temperature:-20~80℃
Applicable Tube:PU / PA / PE / PVC
Product Description
feature:
1) Material of Fitting body: brass;
2) Release rings: round;
3) LOGO on ring: No LOGO;
4) Working Temperature: 0-80C
5) Working pressure: 0-20Bar
6) Fitting types available: Straight fitting, elbow connector, tee branch, bulkhead fitting, y type etc.
7) The fittings can work well even if you test fittings under 40bar within 5-10mins.
8) The fittings can work well even if you test under -20 degree to 80 degree within 3 hours. But normal working temperature is -10 degree to 60 degree.
9) we test the fitting one by one before we send to customer.
Application:
1. One Touch joints used in pneumatic piping
.
2. Used for a wide variety of models to meet all demands.
3. Easy to connect/disconnect tube by one touch.
4. PC Type is useful for piping in confined space, given its six-angle wrench processing inside.
5. Flexible for directional tube with its revolving construction of body (PL & PT Type)
6. Fitting is equipped with O-ring or Teflon coating on the thread.
